AFFIX PROOF 1K(ACRYLIC)
(High Quality Water Proofing Membrane)
DESCRIPTION:
AFFIX PROOF 1K(ACRYLIC) is a special elastomeric polymer based water proof coating. Because of its excellent flexibility and thixotropic nature is an ideal for use on vertical as well as horizontal surfaces. Its single pack, very economical and pollution free water proof coating. Due to its white colour, it has excellent solar insulation capacity.
FEATURE & BENIFITS:
* Long Life & durability of the structure is increased..
* Light weight compared to conventional roofing system, thereby loading on the roofs is reduced.
* Provides seamless and joint free seal throughout the surface, which is impervious to water.
* Lower labour cost due to easy, simple and quick application, leading to quick completion and time saving.
* Excellent bonding to most building materials.
APPLICATION:
* Water proofing cum decorating of external plastered walls.
* Water proofing of new surfaces as well as for the repairs of old surface, whether previously treated or not.
* Suitable for horizontal as well as vertical concrete & wall surfaces.
* Water proofing of roof slabs, terraces, balconies, sum shades (Chajjas), parapet walls etc.
* Water proofing of flashing, roof edgings, gulleys, steeply pitched design etc.
* For water proofing garden, swimming pools, basement, sandwich application is recommended.
For detail, please refer to our technical department.
SPECIFICATION:
S.NO |
PROPERTIES |
RESULTS |
1 |
Appearance |
White Liquid |
2 |
Solid Content |
65% Heated ± 2% |
3 |
Specific gravity |
1.27 ± 0.1 |
4 |
Thickness Coat |
Approx. 1.0 mm, wet film |
5 |
Re-Coat Interval |
4 Hours (minimum) |
6 |
Surface Dry Time |
None after 4 Hours (minimum) |
7 |
Curing Time |
48 Hours |
8 |
Tensile Strength |
440 PSI, ASTM D-412 |
9 |
Temperature Limits |
5°C to 50°C |
10 |
Cracking |
None |
11 |
Elongation |
200%- 300% |
12 |
Method of Application |
Brush, Roller, Spray or Squeegee |
COVERAGE:
Coverage depends upon the nature of the surface to be applied. But on average, smooth surface will give first coat – 350 gm.sq.mt. & 300 g./sq.mt. (second Coat) Two coats will give 1 mm dry film thickness.
APPLICATION INSTRUCTIONS:
Surface should be free from oil, grease, and loose particles. In case of metal surface, remove rust and contamination for better protection, if the surface has been already treated with the asphalt or bitumen coatings or roofing’s felts and any blisters, peel-off tracs, loose laying etc. must be cut away and be properly filled. Masonry joints must be flush jointed. In case of tiling the roof, terrace, balcony or sunshade, the joints between the tiles should be properly filled to avoid water penetration through the joints.
Apply primer coat of AFFIX PROOF 1K(ACRYLIC) 25% - 30% diluted with water by brush,spray, or roller. After the primer coat is completely dried, apply a minimum of two coats of undiluted AFFIX PROOF 1K. It is veryimportant to ensure each coat is totally cured (i.e., 8 Hrs. at 30°C) before the next coat is applied.
For better result use FIBRE GLASS NET embedded into first coat of AFFIX PROOF 1K while still wet mainly expansion areas joints with parapet. All brushes and tools should be cleaned by water immediately after use. AFFIX PROOF 1K (ACRYLIC) can be diluted with water (5-10%) for easy application.
STORAGE AND SHELF-LIFE: Dr. Wall Care AFFIX PROOF 1K (ACRYLIC) has a shelf life of 12 months when stored in normal dry conditions.
PRECAUTIONS:
Keep out of reach of children. Wear suitable protective clothing, gloves, and eyes/face protection. After contact with skin, wash immediately with plenty of clean water. In case of contact with eyes rinse immediately with plenty of clean water and seek medical advice.For more details, please refer the relevant Material Safety Data Sheet
ORDER INQUIRY