"2K- WATER PROOFING SYSTEM"
DISCRIPTION:
Dr. WALL CARE WP COMBO is 2 parts polymer-modified flexible cementitious waterproofing membrane coating specially formulated for Concrete and Masonry Surface which is supplied in ready-mix kits (2 parts). When the dry part is mixed with acrylic-modified emulsion and applied according to direction, the cured. The application can be applied on damp surface and Excellent waterproofing property - No leakage up to 1-2mm. hydrostatic pressure. It’s a flexible and seamless waterproof membrane and acts as an excellent water barrier to Concrete and Masonry Surface. Environmentally friendly - free Volatile Organic Compound (VOC)
APPLICATION:
· All type of exterior masonry surfaces, concrete, cement sand renderings etc.
· Terrace water proofing, Sloping Roofs and Chajjas, Swimming pools, Toilets & Bathrooms, Basements,tunnels and dams etc.
· All new cement-sand concrete surfaces should be allowed to age 6 to 8 weak before surface coating.
METHOD:
· Surface for treatment must be thoroughly cleaned of all laitance, loose material, oil, grease, etc. by mechanical means such as wire brushing & shot blasting.
· Finally vacuum cleaning of all loose soiled and liquids can be done, if required.
· All surface cracks up to 5mm width should be filled up with Crack seal.
· Apply minimum two neat coats of waterproofing 1mm.
·.After application of 1st coat,allow a gap of minimum 4-5hours, before the subsequent coat and it must be applied in perpendicular direction to the first coat.
· Dr. wall Care Seal & coating can be applied by spray machine also. For large areas use of spray machine
· Care should be taken to avoid application under direct Sunlight. The appropriate application time for the product is either early morning or late evening.
· The coverage of the product depends upon the surface condition, it roughness and absorption. In normal condition, the coverage of seal & coating 10-12 sqft./kg for two coat.
PACK:
15Kg=10Kg Powder + 5Kg Latex Liquid
SHELF LIFE:
12 months in original unopened package.
SPECIFICATION:
S.NO
|
PROPERTIES
|
RESULTS
|
1
|
Mix Component
|
Mix Ratio 1:2 (A: B)
|
2
|
Polymer Content
|
>22%
|
3
|
Water Absorption
|
< 3%
|
4
|
Tensile Strength – as cast
|
2.5 N/mm²
|
5
|
Adhesion to substrate
|
>1.0 N/mm²
|
PRECAUTIONS:
Keep out of reach of children. Wear suitable protective clothing, gloves, and eyes/face protection. After contact with skin, wash immediately with plenty of clean water.
In case of contact with eyes rinse immediately with plenty of clean water and seek medical adviceFor more details, please refer the relevant Material Safety Data Sheet